Chevrolet Performance 350 Ho Deluxe 330HP

Replaces 19420879

350 HO Deluxe Forget rebuilding! No need to rebuild your 350ci Chevrolet engine! This Chevrolet Performance 350HO crate engine is assembled with brand new components from General Motors. Starting with a new GM 4-bolt main block, it includes the cast iron high-flow Vortec heads, dual-plane aluminum intake manifold, 9.0:1 compression ratio, and a hydraulic flat tappet camshaft that provides you 333 HP and 381 Ft-Lbs of torque. Includes a GM HEI distributor, and a 670CFM Holley carburetor TECH SPECS Part Number: 19420879 Engine Type: Chevy Small-Block V-8 Displacement (cu in): 350 Bore x Stroke (in): 4.000 x 3.480 Block (P/N 10105123): Cast-iron with 4-bolt main caps Crankshaft (P/N 10243070): Nodular iron Connecting Rods (P/N 10108688): Powdered metal steel Pistons (P/N 12514101): Cast-aluminum Camshaft Type (P/N 24502476): Hydraulic flat tappet Camshaft Lift (in): .435 intake / .460 exhaust Cylinder Heads (P/N 12558060): Vortec iron; 64cc chambers Valve Size (in): 1.940 intake / 1.500 exhaust Compression Ratio: 9.0:1 nominal Rocker Arms (P/N 10089648): Stamped steel Rocker Arm Ratio: 1.5:1 Water Pump (P/N 19201601): Cast iron, long-style Flexplate (P/N 14088765): 12.750" Recommended Fuel: Premium pump Ignition Timing: 32° Total @ 4,000 rpm Maximum Recommended rpm: 5,100 Balanced: External Intake Manifold (P/N 12496820): Dual Plane INSTALLATION NOTES

• Comes with 12.750" externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission.
• Has right-side oil dipstick
• Requires fuel line from fuel pump to carburetor
• Fuel pump pressure is pre-set; fuel pressure regulator not required
• Some assembly and minor engine tuning required
• Designed for pre-1976 street vehicles or any off-road vehicle
• Not intended for marine applications